How to... replace the rear roller guards – Life Fitness 93T User Manual

Page 136

3-21

Roller
Guard, LT

Roller
Guard, RT

Rear Roller
Adjusting Screws

Washer

Roller
Guard
Screw

Washer

Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills

How To... Replace the Rear Roller Guards

Special Service Tools Required: NONE

1. Remove the Screws

securing the Rear Roller
Guard Assembly to the
Frame.

2. Place Roller Guard in position as shown with the top surface under walking belt. Align mounting holes.

Install Screws and fasten securely. Approx. 22-37 in/lbs.

4. Repeat steps for opposite side. After completion run treadmill and check for interference or binding. If needed

loosen Mounting Screws, re-align Guard, and refasten securely.

Roller Guard to be
located between belt
and deck

Align mounting holes
with grommet holes