How to... replace the rear roller, Rear roller striding belt letter “r – Life Fitness 93T User Manual
Page 135

3-20
Roller
Guard, LT
Roller
Guard, RT
Rear Roller
Adjusting Screws
Washer
Roller
Guard
Screw
Roller
Guard
Screw
Washer
Rear Roller
Striding Belt
Letter “R”
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Rear Roller
Special Service Tools Required: NONE
1. Turn the unit power OFF at the
switch, and then unplug the line
cord at the wall outlet.
2. Remove four screws securing
the Roller Covers and Guards,
and then remove the Roller
Covers and Guards from the
Rear Roller.
3. Index the initial position of the
Adjusting Screw or count
rotations, and remove the Rear
Roller Adjusting Screws. See
“How to…” in this section.
4. Remove the Rear Roller out from under the Striding Belt and discard.
5. Install a new Rear Roller in the reverse order of removal.
6. Reinstall Tensioning Bolts back in the Rear Roller.
7. Refer to “How To…” Adjust Striding Belt
Tracking or Tensioning in this section.
8. Reinstall the Rear Roller Guards and
Covers.