Lincoln Electric EAGLE SVM192-A - Manual (Page 83)

Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician
or machine operator and will invalidate your factory warranty. For your safety and to avoid
electrical shock, please observe all safety notes and precautions detailed throughout this
manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 1-888-935-3877.
TEST DESCRIPTION
The following procedure will aid the technician in removing the engine and/or rotor for
maintenance or replacement of either component.
NOTE: The procedures described here are for a Kohler engine. The same basic proce-
dures apply to the other engines, although there may be a few slight wiring variations.
MATERIALS NEEDED
Lincoln Electric Rotor Removal Kit (S20788) - FOR ROTOR REMOVAL ONLY
Misc. Hand Tools
Impact wrench
Torque wrench (ft lbs
Feeler gauge (.017)
INSTRUCTIONS
For Engine and Rotor removal only, follow steps 1-25 under ENGINE AND ROTOR
REMOVAL PROCEDURE. For reassembly of engine and rotor go to REASSEMBLY
PROCEDURE.
For rotor removal, follow the ENGINE AND ROTOR REMOVAL PROCEDURE and
ROTOR REMOVAL PROCEDURE.
ENGINE/ROTOR REMOVAL AND REPLACEMENT
TROUBLESHOOTING AND REPAIR F-47 F-47
EAGLE™ 10,000
WARNING
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC