Accessories, Optional equipment – Lincoln Electric EAGLE SVM192-A User Manual

Page 24

ACCESSORIES

C-2

EAGLE™ 10,000

OPTIONAL EQUIPMENT

(Field Installed)

K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR

SMALL WELDERS - For road, off-road and in-plant

and yard towing. (For highway use, consult applicable

federal, state and local laws regarding requirements for

brakes, lights, fenders, etc.)

Order

K957-1 Trailer

K958-1 Ball Hitch

K958-2 Lunette Eye Hitch

K959-2 Fender & Light Kit

K965-1 Cable Storage Rack

K889-2 & -3 Two-Wheel Undercarriage - For moving

by hand. Overall Width 29 in (.74m) Both have pneu-

matic tires. Puncture proof tires included with K889-3.

K1631-1 Puncture Proof Wheel Kit - For converting

K889-2 or K933-1 to puncture proof pneumatic tires.

K893-1 Caster for Undercarriage - Mounts to the

front of the K889-2 or 3 to allow easy movement on

smooth surfaces. Includes 6” diameter hard rubber

wheel and convenient toe-on, toe-off locking brake.

K933-1 Four Wheel Undercarriage - For Hand

Moving. Rear pneumatic tires, front molded wheels.

K934-1 Cylinder Brackets - For use with K933-1. For

transporting one welding gas cylinder.

K1737-1 FOUR WHEEL ALL-TERRAIN UNDERCAR-

RIAGE - For moving by hand at construction sites.

Heavy duty puncture resistant pneumatic tires.

K1770-1 UNDERCARRIAGE (FACTORY) - For mov-

ing by hand on a smooth surface. One or two gas cylin-

ders can be mounted on the rear of the undercarriage

with the installation of K1745-1 Cylinder Holder(s).

Heavy duty puncture resistant pneumatic tires and

front caster.

K1745-1 GAS CYLINDER HOLDER

Holds Welding Gas Cylinder for use on K1770-1

Undercarriage. One or two may be installed on an

undercarriage.

K1788-1 ROLL CAGE - Gives added damage protec-

tion.

Attaches to K1737-1, K1770-1, and K957-1.

K886-1 Canvas Cover -To protect the EAGLE 10,000

when not in use. Made from attractive red canvas

material which is flame retardant, mildew resistant, and

water repellent.

K802-R Power Plug Kit- provides four 120V plugs

rated at 15 amps each and one dual voltage, Full KVA

plug rated at 120/240V, 50 amps.

K802-N Power Plug Kit

- Provides four 120V plugs

rated at 20 amps each and one dual voltage, full KVA

plug rated at 120/240V, 50 amps.

K894-1 Spark Arrester Kit - Includes a heavy gauge

steel, approved spark arrester and clamp for easy

mounting to muffler exhaust pipe.

K1690-1 GFCI RECEPTACLE KIT -

Includes one UL

approved120V ground fault circuit interrupter duplex type

receptacle

with

cover

and

installation

instructions.

Replaces the factory installed 120V duplex receptacle.

Each receptacle of the GFCI Duplex is rated at 20 Amps,

the maximum total current from the GFCI Duplex is limit-

ed to the 20 Amps. Two kits are required.

K1816-1 FULL KVA ADAPTER KIT - Plugs into the

120/240V NEMA 14-50R receptacle on the case front

(which accepts 4-prong plugs) and converts it to a

NEMA 6-50R receptacle, (which accepts 3-prong

plugs.)

T12153-9 Full-KVA Power Plug - One dual voltage plug

rated at 120/240V, 50 amps.

K930-2 TIG Module - Provides high frequency and

shielding gas control.for AC and DC GTAW (TIG) weld-

ing applications. Its compact case is designed foe easy

carrying, complete with a handle. High frequency

bypass is built in

Requires K938-1 Contactor Kit, K936-4 Control Cable,

and K814 Arc Start Switch.

K938-1 Contactor Kit - For use with TIG Module,

Provides a “cold” electrode until the triggering device

(Arc Start Switch) is pressed.

K936-4 Control Cable - Connects TIG Module to Eagle

10,000.

K814 Arc Start Switch - Attaches to the TIG torch for

convenient finger control.

K937-45 Control Cable Extension - Allows TIG Module

to be operated at distances up to 200ft. from the power

source. Available in 45ft. (13.7m).

K844-1 Water Valve Kit - For use with water cooled

TIG torch, Installs inside of TIG Module.

K939-1 Docking Kit - For Mounting the K930-2 TIG

Module on top of the Eagle 10,000.