beautypg.com

Troubleshooting and repair, Caution – Lincoln Electric EAGLE SVM192-A User Manual

Page 45

background image

ENGINE PROBLEMS

Observe Safety Guidelines detailed in the beginning of this manual.

PROBLEMS

(SYMPTOMS)

POSSIBLE AREAS OF

MISADJUSTMENT(S)

RECOMMENDED

COURSE OF ACTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely,

contact the Lincoln Electric Service Department for technical troubleshooting assistance before you proceed.

Call 1-888-935-3877.

CAUTION

Engine will not go to high idle when

attempting to weld. Welding output

is normal when Idler Switch is in

“HIGH” position.

Automatic idle

function works properly when the

auxiliary power is loaded.

1. Make sure the welding cables

and connections are tight.

1. Check for broken or faulty con-

nections in the sensing lead

(#254). Make sure the connec-

tions are tight at the Electrode

Output Terminal and the Range

Switch See

Wiring Diagram.

2. Make sure the lead is routed

through the toroid.

Engine will not go to high idle when

attempting to weld or when the aux-

iliary power is loaded. Welding out-

put and auxiliary power output is

normal when Idler Switch is in the

“HIGH” position.

1. Make sure the welding cables

and connections are tight.

2. Automatic idler may not function

if the auxiliary power is loaded to

less than 150 Watts.

1. Check for broken or faulty con-

nections in the Toroid leads.

(#260 and #261).

Make sure

their connections are tight at the

PC Board.

See

Wiring

Diagram.

2. The Toroid may be faulty.

3. The Printed Circuit Board may

be faulty. Replace.

Engine will not go to high idle when

the Auxiliary Power is loaded. The

Idle Circuit works OK with a weld-

ing load.

1. Automatic idler may not function if

the auxiliary power is loaded to

less than 150 Watts.

1. If the machine works OK when

set to High Idle,mMake sure that

leads #3 and #6 are wrapped

correctly through the Toroid.

2. If the machine does not function

properly at High Idle check that

the connections are good at the

circuit breakers and that the cir-

cuit breakers are functional.

TROUBLESHOOTING AND REPAIR

F-9

F-9

EAGLE™ 10,000

Return

to

Section

T

OC

Return

to

Section

T

OC

Return

to

Section

T

OC

Return

to

Section

T

OC

Return

to

Master

T

OC

Return

to

Master

T

OC

Return

to

Master

T

OC

Return

to

Master

T

OC