KTI Networks KS-2601 - Manual (Page 76)

72
A. Product Specifications
[ 24+2G fully-modularized model ]
Access Method Ethernet, CSMA/CD
Standards Conformance IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE
IEEE 802.3z, IEEE 802.3ab (1000Base)
Communication Rate 10/100/1000Mbps,
Full / Half duplex (auto-negotiation)
Indicator Panel LEDs - each unit : Power / each port : Link/Act,
Full/Col
Number of Ports 3* 8-port modules, 2* gigabit modules ports
Dimensions 440W x 254D x 44H mm
Certification CE Mark, FCC Class A
Input Power Full range: 100 to 240V, 50 to 60 Hz
Temperature Standard Operating: 0 to 50
o
C
Humidity 10% to 90% (Non-condensing)
Bridging Function Filtering, forwarding and learning
Switching Method Store-and-forward
Address Table 8K
entries
Filtering/Forwarding Rate Line speed
Maximum Packet Size
1536 Bytes (tagged packet)
Flow Control 802.3x for full duplex, backpressure for half duplex
VLAN 802.1Q VLAN, Port-based VLAN
QoS 4 priority queues per ports, for port-based/802.1P
tagged-based priority operation
Spanning Tree Support IEEE 802.1D protocol
Trunking 3 groups max.
Mirror Port 1 capture port for Ingress/Egress traffic, DA/SA
filtering function is supported
SNMP Ver. 1, Supports MIB II(Interface), Bridge MIB,
Etherlike MIB, Private MIB
Static Mac ID Access Limit Static Mac address access limit on port
802.1x
Yes, support Authentication and Transparent modes
Protected Port Yes
Rate Control Yes, from 64Kbps to 1000Mbps for both ingress and
egress traffic
IGMP Yes, IGMP snooping function
Out-band Management Console
In-band Management
Telnet, http, SNMP
Software Update/Backup by TFTP protocol, Xmodem, for firmware /
configuration