KTI Networks KS-2601 - Manual (Page 48)

44
3. Spanning Tree
In the page, users can enable/disable spanning tree function and configure the
bridge parameters. Please refer to 2.24 of Section 6.2 for the details of these
parameters. Press [Apply] after any modification.
Configuring port parameters for spanning tree, press [Configuration STA Port]
and the configuration page will appear.
Users can select a port number and check its spanning tree status. Users can
also modify these parameters. Please refer to 2.24 of Section 6.2 for the details
of these parameters. Press [Apply] after any modification.