KTI Networks KS-2601 User Manual
Page 49
45
4. Dynamic Mac Address Table
This web page will show the Mac address table content of the switch for
connection ports. Select the port first and the Mac address learned by the
switch on the port will be shown. Up to 128 Mac addresses will be shown.
You can select the Mac addresses that you want to assign them as static Mac
addresses for the port. Click [Add to Static Address Table] after the selection.
Then you can click “Static Address Table” at left side of the web page to check
the static address assignment.
For the details about Static Address, please refer to Section for “Static Address
Table”.
Note: Because of aging time operation of switch, wrong Mac addresses could be
found in the Mac Address Table sometimes. These wrong Mac addresses are
the machines that had ever accessed to the port and the switch learns them into
the learning table. The switch will clear them when the aging time is up. Users
can shorten the aging time and refresh the web page when they want to get the
correct Mac address table content. Then, recover the aging time when the
correct Mac address table content is got.