KTI Networks KS-2601 User Manual
Page 30
26
rmon........... Show RMON Function configuration
security....... Show port security mode for static MAC address
snmp........... Show snmp configuration
sta............ Show Spanning Tree setting
stormcontrol... Show Storm Control configuration
trunk.......... Show Trunk function configuration
3.1 show ? and show help commands will show the sub-command list.
3.2 show 1qvlan command will show current 802.1Q VLAN status and
settings.
Its syntax is . . .
>show 1qvlan
Syntax: show 1qvlan [status|static|table|port]
status : show 802.1q, Ingress Filter and GVRP protocol status
static : show STATIC VLAN table content
table : show ALL VLAN table content
port : show the PVID and Priority for tag of ports
For example,
>show 1qvlan status
802.1Q VLAN : Enable
Ingress Filter: Enable
VLAN Mode : SVL
>show 1qvlan static
=================== Static 802.1Q VLAN Table ====================
VLAN ID : 1(0x001) , VLAN Name: Default VLAN
Tagged Member Port :
Untagged Member Port : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26
============================ Finish =============================
>show 1qvlan table
===================== All 802.1Q VLAN Table =====================
VLAN Type: STATIC
VLAN ID : 1(0x001) , VLAN Name: Default VLAN
Tagged Member Port :
Untagged Member Port : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26
============================ Finish =============================
>show 1qvlan port
PORT PVID PRIORITY
=============================
1 1(0x001) 0
2 1(0x001) 0
3 1(0x001) 0
4 1(0x001) 0
5 1(0x001) 0