Kodak 6B7198 - Manual (Page 90)

Using the Long Roll Accessory
D-26 May 2002
Locating the First Punched Frame
1. On the Film Controls dialog box, click Load First Frm. A dialog box appears.
2. Select the Film Processing Direction:
• If you are calibrating the left sensor offset, select Forward (Left to Right).
• If you are calibrating the right sensor offset, select Reverse (Right to
Left).
3. Type -1 in the First Punch Number field.
-1 tells the scanner software to find the first punch (in the specified direction).
4. Click Go.
The status bar shows the Current Punch (the first punch found). The example
shows that the first punch found is 100.