KORG STAGE VINTAGE SV-1 - Manual (Page 44)

30 – Advanced settings | Changing the touch sensitivity
C
HANGING THE TOUCH SENSITIVITY
The keyboard sensitivity, or touch, can be programmed.
1. Press the TOUCH button.
After you press the TOUCH button, its LED starts blinking. Also, the
FAVORITE button corresponding to the selected touch curve is turned on.
2. Press the FAVORITE button corresponding to the desired touch curve.
3. Press the TOUCH button to confirm and return to the normal operations.
This is the diagram of the touch curves:
NOTE: Touch sensitivity is memorized when saving a favorite sound. Also, it is
memorized by each preset or favorite sound you can edit with the SV-1 Editor,
after you choose the Write Current Preset command.
Favorite # Touch curve Note
1 Normal Normal piano touch.
2 Soft 1 Loud notes can be produced even by playing lightly.
3 Soft 2
4 Medium 1 Loud notes can be produced by playing normally.
5 Medium 2
6 Hard 1 Loud notes can be produced only by playing very hard.
7 Hard 2
8 Fixed Fixed dynamic. To program the desired dynamic, you must use
the SV-1 Editor.
Playing strength
Soft Strong
Strong
( )
Note
loudness
Soft
Hard
Normal/Medium
SV1-100-UserGuide-EFGI.book Page 30 Tuesday, June 30, 2009 9:23 AM