Separation roller and tires, Replacing the separation roller, Replacing the separation roller tires – Kodak Scanners i800 Series User Manual

Page 58

A-61169 July 2003

5-15

Separation roller and
tires

This section provides procedures for changing the separation roller and
tires.

Replacing the separation
roller

To replace the separation roller:

1. Open the swing out door.

2. Lift the roller cover.

3. Pull the separation pad holder forward and remove the separation

roller.

To install the new separation roller:

4. Pull the separation pad holder forward and put the new separation

roller in place.

NOTE: Be sure to line up the slots on the separation roller with the

holders.

5. Push the separation roller holder back in place.

6. Lower the roller cover.

7. Close the swing out door.