Kodak Scanners i800 Series - Manual (Page 32)

A-61169 July 2003 4-1
4 Document Printer and Patch Reader
This chapter provides instructions for using the Kodak Imagelink
Document Printer 1 and the Patch Reader. The following can be found in
this chapter:
•
Purging the ink cartridge
•
Replacing the ink cartridge
•
Replacing the ink blotter strips
•
Setting the printer position
•
Patch types supported by the Patch Reader
•
Setting the Patch Reader position
The Document Printer The Document Printer 1 uses a standard ink cartridge, which is an
inexpensive and effective way to apply information to the scanned
document and utilize document management systems such as batching
and time-stamping.
The Document Printer 1 provides a print capability that is programmed to
support alphanumeric characters as defined by the host. It supports date,
image address, time, document count and custom messages. All print
information is captured in a document header record. All printer controls
and functions are accessible via the ISIS and TWAIN drivers.
Printed information The information printed by the Document Printer is defined during
application setup by your system administrator or integrator.
Any combination of the following items can be printed, provided the total
length does not exceed 40 characters.
•
Document image address (any, all or none of the four image address
fields, in any order)
•
Date
•
Time
•
Document count
•
Messages - up to 6 fields can be defined to build a print string