Kodak Scanners i800 Series - Manual (Page 38)

A-61169 July 2003 4-7
Replacing the ink blotter
strips Ink blotter strips collect ink overflow. They should be replaced when there
is a build-up of ink. Replacement blotter strips may be purchased through
your supplier. See Chapter 5, Maintenance, for a list of available supplies.
To replace the ink blotter strips:
1. Open the swing out door.
2. Lift the horizontal transport plate.
3. Remove the horizontal belt module.
4. Locate the blotter strips. You can replace one, some or all of the strips
as necessary.