Kodak Scanners i800 Series - Manual (Page 31)

3-14 A-61169 July 2003
Jogging the transport The Jog button temporarily (4 seconds) turns on the transport to help
clear a document jam. This function is only available when the scanner is
disabled. The Jog button is intended to clear simple document jams. If
documents are lodged in several locations within the scanner, use the
procedures in Chapter 6, Troubleshooting/Messages.
If a document jam occurs:
•
Select the Jog icon.
Programmable key
assignments
There are three programmable keys on the Operator Control Panel.
These keys can be assigned functions by the host application.
Programmable keys are available for use when the scanner is enabled.
The Operator Control Panel displays the numbers 1 through 3. These
numbers correspond to the buttons on the Control Panel.
Each of the programmable keys can be assigned the following functions:
•
No Scanner Functionality (default)
•
Scanner End-of-Job
•
Terminate Batch
•
Skip Multi-feed Detection
•
Skip Printing
•
Skip Patch Recognition
Check with your System Administrator to determine what functions are
programmed.