Kodak DCS 700 - Manual (Page 91)

5-6
Formatting a PC Card
To prevent formatting the wrong PC Card, there can only be one card in the camera when
you format a card. Format the card using either the quick format or the full format feature.
IMPORTANT:
Quick format, while faster, is not recommended if there is a possibility that there are
defects on the PC Card.
1 Highlight the Menu icon, then
choose Main Menu from the
dropdown menu.
2 Select Card from the Main
menu.
The Card menu appears.
3 Choose Quick Format or Full
Format.
If two cards are in the camera,
you are prompted to remove the
inactive card. For example, if
CARD2 is active, you are
prompted to remove CARD1.
4 Remove the inactive card, then
select Retry.
If you remove the active card,
the message at the left appears.
5 Re-insert the card in the proper
slot, then select Retry.