Kodak DCS 700 - Manual (Page 211)

11-38
22 Aperture setting using the Sub-Command
dial:
At the default setting, aperture can be changed
by rotating the Sub-Command dial. To disable
this function, select 22-1. Set the aperture by
rotating the lens aperture ring in this case.
Enabled 22-0
Disabled 22-1
23 and focus indicators
To stop the display of the or indicators in
the viewfinder in Autofocus mode, select 23-1.
(
or indicate if the focus is behind or in
front of the subject.)
Displayed 23-0
Not displayed 23-1
24 Auto Exposure/Flash Exposure bracketing:
At the default setting, when bracketing is
activated, both Auto Exposure and Flash
Exposure bracketing are performed.
To perform only Auto Exposure bracketing or
Flash Exposure bracketing, select 01E or 10E.
Default: Auto
Exposure/Flash
Exposure
bracketing 24-0
Auto Exposure
bracketing,
Flash Exposure
bracketing,
Auto Exposure/
Flash Exposure
bracketing 01E
10E
11E
Number Function Your Option LCD