Kodak DCS 700 - Manual (Page 83)

4-4
Total Actuations
You can determine the number of images captured by your camera from the time of its
manufacture.
Use Folder 1
You can specify whether the default place to store images is an empty folder or folder 1
when you insert a new PC Card.
1 Choose Total Actuations from
the Properties menu.
The Total Actuations screen
appears, showing the number of
images captured.
2 Press the OK button to dismiss
the screen.
1 Choose Use FOLDER01 from
the Properties menu.
The Use FOLDER01 screen
appears.
2 Press the top or bottom of the
Four-way switch to highlight
Yes or No.
If you select Yes, every time you
replace your PC Card, images
will be stored in folder 1.
If you select No, every time you
replace your PC Card, images
will be stored in the first empty
folder found on the PC Card.