Kodak DCS 700 - Manual (Page 69)

3-6
The white arrow opposite the
connector should be pointing
upwards as the battery is
inserted.
Some (not all) cameras have a
white arrow pointing
downwards (towards the camera
bottom) just above the battery
compartment. If your battery
and your camera both have the
arrows, then the arrows should
be aligned as you insert the
battery into the camera.
4 To insert: slide the battery to the
back of the battery slot and press
firmly in place.
To remove: slide the battery out
of the battery slot.
5 Close the Battery/PC Card door.
6 Turn the latch assembly
clockwise and return it to its flat
position.
☛
You can insert or remove a
battery while the camera is
connected to an AC adapter
for camera. Refer to “AC
Adapter for Camera” on page
3-14.
VIDEO
SERIAL