Kodak DCS 700 - Manual (Page 229)

14-8
Cleaning the Imager
If the imager is dirty, check the Kodak Web site (www.kodak.com) for instructions on
cleaning. Choose Service and Support, then under Professional Photography choose
Cameras, Digital and choose DCS 700 Series Digital Camera. Follow the instructions
under Cleaning Recommendations for CCD Coverglass.
Reassembling the Camera
You must reassemble your camera after inspecting or cleaning the imager.
1 Choose Yes on the Close Shutter
screen.
The mirrors lower and the
shutter closes.
2 Turn the camera off.
3 Carefully replace the IR or
anti-aliasing filter.
4 Replace the lens.