Kodak DCS 700 - Manual (Page 47)

2-20
Lens
Refer to Appendix C for a list of lenses that are compatible with your camera.
Mounting the Lens
CAUTION:
Only use lenses that are listed in Appendix C. Other lenses can potentially break
your camera’s IR filter.
1 Remove the camera body cap
and the front and rear lens caps.
2 Position the lens in the camera’s
bayonet mount so that the
mounting indexes on the lens
and camera body are aligned.
Taking care not to press the lens
release button, twist the lens
counterclockwise until it locks
in place.
When mounting or removing a
lens, make sure that the
camera’s power is turned Off.