Samsung ITP5012L - Manual (Page 63)

© SAMSUNG Electronics Co., Ltd. Page 47
MAKING A CALL
Speed Dialling
The OfficeServ system can store up to 500 frequently dialled telephone numbers in the system speed dial list.
In addition you can have up to 50 personal speed dial numbers stored in the system.
!
You can dial a preprogrammed telephone number stored in the system-wide speed
dial list of numbers 500-999 or from your personal list of numbers 00-49.
1.
When the phone is in standby mode
press the [Screen] button repeatedly until
the Soft menu screen appears.
!
Or, press the [Speaker] button or dial [1][6],
the function code for speed dialling.
2.
Press the [Select] button corresponding
to the [SPEED DIAL] button displayed
on the Soft menu screen.
3.
Dial the speed dial number required and,
the associated telephone number
will be dialled automatically.
4.
The phone of the other party will ring.
Begin speaking after the other party
picks up the phone.
- The ITP-5012L also has an internal Phone Book for storing frequently called numbers.
Refer to the ‘Phone Book’ section of ‘Application Menus’ for the use of the internal
Phone Book function.
- The system speed dial numbers from 500 to 999 are registered by the System
Administrator, so any telephone user can use these system-wide speed dial numbers.
- The personal list of numbers from 00~49 are personally registered numbers that can
be only used on your station. The station may be assigned up to 50 in multiples
of 10. The System Administrator determines the maximum number of personal speed
dial numbers available to you.
NOTE