Samsung ITP5012L - Manual (Page 157)

© SAMSUNG Electronics Co., Ltd. Page 141
APPLICATION MENUS
Viewing Status Information
Allows you to check the feature status registered on your phone.
1.
Press the [Menu] and use the direction buttons to select
! ! ! !
[4. Status Info]. Then, press the [Enter] button.
2.
Displays the Call Forwarding, Absent Message,
DND, and Lock status of your IP phone.
Enbloc Timeout
Allows you to set a valid time from entering a phone number to pressing the [Send] button when
the dial mode of the IP phone is set to Enbloc.
1.
Press the [Menu] button and use the direction buttons to select
! ! ! !
[5. Enbloc Timeout]. Then, press the [Enter] button.
2.
Use the direction button to select an Enbloc
Timeout time(options are : 30 seconds/a minute/
three minutes).
Then, press the [Enter] button.
"
If you do not press the [Send] button before,
the Enbloc timeout the entered phone number
will be cancelled and the number must
be re-entered. This function is applied to the
application menu screen.
"
Enbloc
This is a dial mode set in the IP phone by default. Enter the phone number and press the
[Send] button to make a call. In the Enbloc mode, you can just delete an incorrect number
using the [Cancel] button and re-enter the phone number without hanging up the IP phone and
starting again.