Kodak DryView 8900 - Manual (Page 87)

Troubleshooting
January 10, 2006 5E6155 4-17
26-166 Film Jam in Area 2:
Transport Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the front door.
2. Remove any film from the
vertical transport and film
platen.
3. Close the door.
26-167 Film Jam in Area 2:
Transport Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the front door.
2. Remove any film.
3. Close the door.
26-169 Film Jam in Area 3: Platen Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the front door.
2. Remove any film.
3. Close the door.
26-542 Film Jam in Area 4:
Processor Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the hood.
2. Remove any film.
3. Close the hood.
26-543 Film Jam in Area 5:
Processor Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the hood.
2. Remove any film.
3. Close the hood.
26-544 Film Jam in Area 5:
Densitometer Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the hood.
2. Remove any film.
3. Close the hood.
26-545 Film Jam in Area 5: Sorter Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the hood.
2. Remove any film.
3. Close the hood.
26-546 Film Jam in Area 6: Sorter Jobs will continue to be
queued. Film affected by the
error will be reprinted. 1. Open the hood.
2. Remove any film.
3. Close the hood.
27-121 Internal Hardware Failure:
Optics Jobs will continue to be
queued. Film affected by the
error will be reprinted.
1. Restart the laser imager.
2. If the error persists, call an
Authorized Service
Provider of Kodak
products.
Number Message Display Message Details Operator Action