Kodak DryView 8900 - Manual (Page 74)

4-4 5E6155 January 10, 2006
Troubleshooting
Operator Actions The action “Restart the laser imager” means to shut down and restart the
laser imager. To restart the laser imager:
1. Touch the Power icon on the local panel.
2. Touch the Restart icon and select Yes. The laser imager will restart
automatically.
The action to “open door manually” is described in “Film Drawers and
Front Door Manual Override Latches” on page 3-14 .
The action to “close the film cartridge” is described in “Manually Closing
the Film Cartridge Lid” on page 4-26 .
Number Message Display Message Details Operator Action
02-104 Inadequate disk Space for
New Job Too many jobs in the
Undelivered or No Media
queue. 1. Delete jobs in the
Undelivered Queue.
2. Load requested media for
jobs in pending queue.
03-111 Undelivered Job due to
Rendering Error Job failed because of bad
image data. Delete job from the
Undelivered Queue.
10-001 Delivery Server Internal
Error The laser imager can no
longer accept jobs. 1. Restart the laser imager.
2. If the error persists, call an
Authorized Service
Provider of Kodak
products.
10-003 Delivery Server Image
Datapath Error The laser imager can no
longer accept jobs. 1. Restart the laser imager.
2. If the error persists, call an
Authorized Service
Provider of Kodak
products.
10-004 USB Failed to Initialize The laser imager can no
longer accept jobs. 1. Restart the laser imager.
2. If the error persists, call an
Authorized Service
Provider of Kodak
products.