Kodak DryView 8900 - Manual (Page 49)

Operation and Maintenance
January 10, 2006 5E6155 3-19
Recycling Empty Film
Cartridges Return your empty Kodak DryView film cartridges to Kodak for reuse and
recycling.
Returned cartridges are carefully inspected. Only components that meet
strict quality standards are reused. Components that do not meet the
standards are sent to recycling centers for reclamation.
This program is part of Kodak’s commitment to reduce the environmental
impact of our products.
To recycle your empty film cartridges:
1. Replace your empty film cartridges in their original packages. Return
as few or as many as you like each time. You can tape up to three
packages together and return them with a single label.
2. Apply a prepaid bar-coded shipping label to each package. Kodak
product labels are free of charge. To get your Kodak shipping labels,
contact your authorized Kodak products distributor.
3. Call FedEx Ground at 1-800-463-3339 (U.S. only). Mention this
program, and arrange for pickup the next working day. Include a
signed “Return Pickup Record” with the packages when they are
picked up. You will find one on the back of each shipping label.
For additional information on the Kodak Recycling Program in the U.S. and
Canada, visit the Kodak Web site: www.kodak.com/go/KES
Requesting a Calibration
Test Print To request a calibration print (step wedge):
NOTE: The system will interrupt a multi-sheet print job to produce the
calibration print.
1. On the System Functions screen, touch the Calibration button.
2. Touch the desired Drawer button.
3. Touch the Print button.
Requesting a Density Test
Print To request a Density test print:
1. On the System Functions screen, touch the Density button.
2. Touch the desired Drawer button.
3. Adjust the density as desired.
4. Touch the Print button.