Konica Minolta 7075 - Manual (Page 99)

Basic Operations 6-29
Basic Operations
Store Mode (continued)
Platen Store Mode (continued)
8 Enter the print quantity, using the keypad. The entered quantity will be displayed on
the upper right message area of the Basic Screen.
To change the print quantity, press [
C (CLEAR QTY.) ] and re-enter the correct quantity.
To delete the scanned data without printing, press [ STOP ], then touch CANCEL on the
popup menu to ensure that you delete the data.
9 Press [ START ]. The copier starts the printing job.