Konica Minolta 7075 - Manual (Page 263)

Key Operator Mode 13-39
Key Operator Mode
Power Save Setting [12]
Select the interval of time that must elapse before Auto Low Power and Auto Shut Off
become activated. Auto Shut Off conserves more energy than Auto Low Power. The
period of time selected for Auto Low Power cannot exceed the Auto Shut Off setting.
Key Operator Mode Screen 1 Key Operator Mode Screen 2
Power Save Setting Screen
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 To display menus [11] to [18] of the Key Operator Mode Screen, touch Lower
arrow key.
3 Touch [12] Power save setting to display the Power Save Setting Screen.
4 The periods of time currently selected for each power save function are located on
the Timer Setting Screen below the Auto Low Power and Auto Shut Off indicators.
Touch the arrow keys (
▲ ) and ( ▼ ) in each area to select a specific waiting period
before activating the Auto Low Power or Auto Shut Off.
NOTES:
1 The period of time selected for Auto Low Power cannot exceed the Auto Shut Off setting.
2 If the same period of time as Auto Shut Off is selected for Auto Low Power, the Auto Shut Off will
function instead of Auto Low Power.
5 Touch OK to complete the setting and restore the Key Operator Mode screen.
6 If other key operator settings are required, select the desired menu item, from [1] to [18].
7 If no further changes are required, touch
PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.