Output modes, Cover sheet feeder (continued) – Konica Minolta 7075 User Manual
Page 131
Output Modes 7-17
Output Modes
Cover Sheet Feeder (continued)
1 Close the RADF securely, then press [
AUTO RESET
].
2 Touch
OUTPUT APPLI.
on the Basic Screen to display the Finisher Mode Selection
Screen.
3 Touch
COVER SHEET
to display the Cover Sheet Insert Selection Screen.
4 Touch
FRONT
,
FRONT+BACK
,
or BACK
to highlight it, then touch
OK
to restore the
Finisher Mode Selection Screen.
5 Touch
OK
on the Finisher Mode Selection Screen. The Basic Screen will be restored.
6 Select additional copying features, as required.
Cover Sheet Insert Selection Screen
7 Load the cover sheet paper into the optional cover sheet
feeder of the FS-108/108B finisher.
If the paper size loaded in the cover sheet feeder is not
suitable, the following messages will be displayed and
copying will be unavailable.
Please load cover sheet in
cover sheet feeder
Adapt paper size between
cover sheet and selected paper
8 Enter the desired print quantity.
9 Position originals in the document feeder or on the platen glass.
When using Store mode, see p. 6-28 to p. 6-30.
10Press [
START
].
CAUTION:
When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.