Machine information, Site requirements (continued) – Konica Minolta 7075 User Manual

Page 44

Text mode
Original mode

3-8 Machine Information

Machine Information

Site Requirements (continued)

NOTES:
1 Dimensions are in inches with millimeters included in parentheses.
2 The Finisher main tray of the FS-108/FS-108B Finisher gradually goes down while printed material is

output. DO NOT allow any object to interfere with the operation of the tray on the left side of the finisher,
as any interference may cause damage to the finisher.

135.0

(3430)

104.7

(2660)

44.0

(1117)

5.9

(150)

24.6

(626)

30.3

(770)

Konica 7075 + FS-108B + TU-108 + LT-411

72.6

(1845)

30.5

(775)

37.4

(950)

4.7

(120)

Unit: inches (mm)

47.4

(1203)

15.7

(400)

63.1

(1603)

21.7

(550)

34.95

(887)

3.9

(100)