Konica Minolta 7075 - Manual (Page 72)

6-2 Basic Operations
Basic Operations
How to Make a Basic Copy
The Basic Screen
When power is turned on, the Basic Screen displays after warm-up; when Auto Power
Saver mode is activated; when ECM password is set; when Key counter is used; or
when Auto/Reset mode is manually or automatically restored. All copying selections can
be initiated from the Basic Screen, whether selected with screen keys or conventional
keys, such as Job Memory.
When the Electronic Copy Monitor (ECM) is activated, a valid 8-digit ECM password,
assigned by the key operator, must be entered before copying can be performed. See p.
5-5.
All of the settings in the Basic Screen, except Print Quantity, can be changed by the key
operator in the Initial Setting Menu Screen.
NOTE: The original count displayed in the center of the message area counts the original pages placed in the
document feeder as they are scanned. A duplex original as well as a simplex original counts 1.
When scanning from the platen glass, the counter increases by 1 for every image scanned.
The popup menu appears on the Basic Screen to select the basic copying conditions.
NOTE: During the process of successive copying jobs, the message “Warming up” may be displayed in the
message area of the Basic Screen to maintain the copy image quality.
Basic Screen
Status key
Rotation/Resolution/
600dpi/HDD icon
Memory indicator
Count/Set
indicator
Basic Mode keys
Messages and
Copier Status
Notice message
Folder keys
Original count
Special Original
key
Output icon
Application key
Rotation Off key
Store key
Output Mode keys