Konica Minolta bizhub 160f - Manual (Page 87)

Before making copies or faxing 3
bizhub 160f 3-37
Positioning highly transparent originals
When making a copy from OHP transparencies, translucent paper, or other
highly transparent original, position the original as detailed below.
1
Raise the automatic document feed-
er.
2
Place the original face down on the
original glass.
3
Position the original on the original
glass so that the corner of the origi-
nal aligns with the arrow in the up-
per-left corner of the original scales.
4
Place a blank sheet of paper of the
same size over the original.
5
Gently lower the automatic docu-
ment feeder.
6
Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3 and “Basic Faxing” on page 5-15.
7
Press the [Start] key.
This will start the print cycle.