Konica Minolta bizhub 160f - Manual (Page 63)

Before making copies or faxing 3
bizhub 160f 3-13
8 [Scan] key Press to enter scan mode. The indicator lights up in green to indi-
cate that the machine is in scan mode.
(Available only when the Scanner Unit SU-502 is installed.)
9 [Fax] key Press to enter fax mode. The indicator lights up in green to indi-
cate that the machine is in fax mode.
10 [Copy] key Press to enter copy mode. The indicator lights up in green to in-
dicate that the machine is in copy mode.
11 [Stop] key • Press to stop a print cycle.
• Press to stop a scanning sequence.
• Stops the fax transmission or reception.
• The indicator flashes in orange when the machine is paused or
while copying.
12 [Panel reset] key Press to reset all copy functions and settings to their defaults.
13 [123/ABC] key Press to switch the 10-key pad between typing in numbers and
typing in letters.
14 [Start] key • Press to start a scanning or print cycle.
• Starts a fax transmission.
• Press to specify the various settings.
• The indicator lights up in green when the machine can accept
copy jobs.
15 [+] [,] key • Press to change the zoom ratio in the range between × 0.25
and × 4.00 in × 0.01 increments.
• Press to scan through the various settings and information, in
order.
• Press to specify the various settings.
16 [Zoom] key Press to select a zoom ratio from among those fixed ratios avail-
able as standard.
17 [Paper] key Press to select the paper tray that contains the desired paper.
18 [*] [)] key • Press to adjust the image density.
• Press to specify the various settings.
19 [Auto/Photo] key Press to change the image density mode.
20 [Sort] key Press to select the sort function.
21 [2in1] key Press to select the 2in1 function.
22 [Status] key Press to view the counters and transmission results. In addition,
the list of settings specified for each function and the reports can
be printed. (p. 3-40)
23 Memory TX lamp Lights up when the memory transmission function is selected.
24 Auto RX lamp Lights up when the automatic reception function is selected.
25 [Resolution] key Used to select the image quality (transmission resolution).
26 [Speaker] key Press to answer the call. Press again to hang up.
27 [Phone book] key Used to display the information programmed for one-touch dial-
ing, group dialing and speed dialing.
28 [Redial/Pause] key • Redials the last number called.
• While dialing, used to generate a pause when transferring from
an internal to an external line or receiving information services.
No. Part name Description