Konica Minolta bizhub 160f - Manual (Page 75)

Before making copies or faxing 3
bizhub 160f 3-25
Correcting text and input precautions:
-
To erase all entered text, press the [Panel reset] key.
- To delete only part of the entered text, use the [*] and [)] keys to move
the cursor (_) to the character that you wish to delete, and then press the
[No/C] key.
- To change an entered character, use the [*] and [)] keys to move the
cursor (_) below the character that you wish to change, and then press
the [No/C] key. Next, enter the new character. The character at the cur-
sor’s position is replaced with the new character.
- If the same 10-key pad is needed to enter two characters in a row, press
the
[)] key after selecting the first character. (Refer to the above example.)
- To enter a space, press 10-key pad [0].