Konica Minolta bizhub 160f - Manual (Page 204)

7 Using the utility mode
7-40 bizhub 160f
Specifying PROGRAM DIAL
If one-touch dial keys have been programmed with fax numbers and a trans-
mission/reception function, that function can be carried out by pressing just
the corresponding one-touch dial key.
Transmission/reception functions that can be programmed:
-
Broadcast transmission
- Timer transmission
- Mailbox transmission
- Polling reception
- Relay initiation transmission
To set program dialing
1
Select the PROGRAM DIAL in the
FAX REGISTRATION menu.
For details, refer to page 7-27.
2
Press the one-touch dial key ([12]
through [15]) programmed with the
desired function.
3
From the 10-key pad, press the key
([1] through [3], [6] or [7]) for the de-
sired function.
Functions that can be selected:
1 BROADCAST
2 TIMER TX
3 MAILBOX TX
6 POLLING RX
7 RELAY INITIATE
4
Follow the instructions for the selected function.
– “To fax using broadcast transmission” on page 6-9
– “To fax using timer transmission” on page 6-12
– “To fax using mailbox transmission” on page 6-14
– “To fax using relay initiation transmission” on page 6-16
– “To receive a fax using polling reception” on page 6-25
The settings are registered.
5
To specify other program dialing settings, repeat steps 3 through 5.