Konica Minolta bizhub 160f - Manual (Page 197)

Using the utility mode 7
bizhub 160f 7-33
6
Press the [,] key, and then use the
10-key pad to enter the SUB.
– A number up to 20 digits long can
be entered for the SUB.
– To enter an SID, continue with step 8.
– If an SID will not be entered, skip to step 9.
7
Press the [,] key, and then use the
10-key pad to enter the SID.
– A number up to 20 digits long can
be entered for the SID.
8
Press the [Yes] key.
9
Using the [*] and [)] keys, select the
desired modem speed.
10
Press the [Yes] key.
The settings are registered.
To program another speed dial
number, repeat steps 3 through 11.
11
Press the [No/C] key to finish pro-
gramming.
The FAX REGISTRATION menu ap-
pears again.