To fax documents positioned on the original glass – Konica Minolta bizhub 160f User Manual
Page 131
Faxing
5
bizhub 160f
5-17
To fax documents positioned on the original glass
1
Press the [Fax] key to enter fax
mode.
2
Lift open the automatic document
feeder.
3
Position the document to be faxed
face down on the original glass.
4
Align the document on the scales
above and to the left of the original
glass.
5
If necessary, change the resolution setting (p. 5-14).
6
Using the 10-key pad, enter the fax
number of the recipient, and then
press the [Yes] key.
–
The fax number of a previously
programmed recipient can also be specified. Refer to “Dialing” on
page 5-3.
7
Press the [Start] key to display a message confirming the size of the
loaded document page. If the indicated page size is correct, press the
[Yes] key. To scan multiple document pages, continue loading pages
and pressing the [Yes] key until all pages are scanned. After scanning
all document pages to be faxed, press the [Start] key to begin sending
the fax.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 7-76).
?
Do you want to stop the transmission?
% To stop the transmission, press the [Stop] key.