Konica Minolta bizhub 160f - Manual (Page 56)

3 Before making copies or faxing
3-6 bizhub 160f
5 Bypass tray Use for manual feeding of paper. Holds up to 10 sheets of paper.
Special paper can be used. (p. 3-31)
6 Tray 1 door If legal-size paper is installed, open this door.
7 Copy tray Holds copies fed out face down from the machine.
The copy tray can be adjusted to one of three angles. Adjust the
copy tray to the angle appropriate for its application. (p. 3-9)
8 Control panel Use to start a copy cycle and make necessary settings. (p. 3-12)
9 Exposure lamp This lamp irradiates the document when it is scanned. The time
until the exposure lamp goes off can be specified. For details on
specifying the setting, refer to “Selecting the MACHINE SETTING
menu” on page 7-6.
10 Original scales Use to align the original. (p. 3-35)
11 Power switch Use to turn the machine on and off. (p. 3-18)
12 External telephone
jack (TEL PORT) Used for connecting a line to a telephone.
13 Telephone line jack
for line 1 (LINE
PORT 1) Used for connecting to a standard telephone line.
14 USB port For more details, refer to the user’s guide for the printer controller.
15 Parallel port For more details, refer to the user’s guide for the printer controller.
16 Fuser cover Open when clearing the misfed paper.
No. Part name Description