Konica Minolta bizhub 160f - Manual (Page 230)

7 Using the utility mode
7-66 bizhub 160f
Specifying REDUCTION RX
1
Select the REDUCTION RX in the RX
OPERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select ON
(print the document reduced), OFF
(split the printout) or CUT (discard
any excess), and then press the [Yes]
key.
The RX OPERATION menu appears again.
Specifying RX PRINT
1
Select the RX PRINT in the RX OP-
ERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select ei-
ther
MEMORY RX or PRINT RX , and
then press the [Yes] key.
The RX OPERATION menu appears
again.
Specifying RX MODE
1
Select the RX MODE in the RX OP-
ERATION menu.
For details, refer to page 7-63.
2
Using the [*] and [)] keys, select ei-
ther
AUTO RX or MANUAL RX , and
then press the [Yes] key.
The RX OPERATION menu appears
again.