Specifying mailbox, To register a mailbox, Specifying mailbox -55 to register a mailbox -55 – Konica Minolta bizhub 160f User Manual
Page 219
Using the utility mode
7
bizhub 160f
7-55
Specifying MAILBOX
Mailbox IDs must first be specified in order to receive faxes with mailbox re-
ception only if the mailbox ID sent by the caller matches the mailbox ID set
on this machine.
2
Note
A mailbox ID cannot be the same as a relay box ID.
To register a mailbox
1
Select the
MAILBOX
in the FAX
REGISTRATION menu.
For details, refer to page 7-27.
2
Using the 10-key pad, enter the mail-
box number.
–
The mailbox number can be set
to any number between 1 and 5.
3
Using the 10-key pad, enter the 4-
digit mailbox ID, and then press the
[Yes] key.
–
The mailbox ID can be set to any
number between 0000 and 9999.
–
If you wish to change the mailbox ID, press the [No/C] key, and then
enter the new number.
4
Using the 10-key pad, enter the
4-digit password, and then press the
[Yes] key.
–
The password can be set to any
number between 0000 and 9999.
–
If you wish to change the password, press the [No/C] key, and then
enter the new password.
–
If no password is to be specified, press the [Yes] key without enter-
ing anything.
The FAX REGISTRATION menu appears again.