Upgrading your software and firmware, Additional care and maintenance – Kodak Series 3 User Manual
Page 79
Appendix
www.kodak.com/go/support
72
■
Battery performance is reduced at temperatures below 5
°
C (41
°
F). When using
your camera in cold weather, carry spare batteries and keep them warm. Do not
discard cold batteries that do not work; when they return to room temperature,
they may be usable.
■
If you are getting fewer than 20 pictures per charge with your Kodak Ni-MH
rechargeable digital camera battery, (and if none of the tips above seem to help),
consider refreshing the battery (see
) or replacing it.
For more information on batteries, see your camera user’s guide, or visit
.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the printer dock firmware (the software that runs on the printer
dock). Visit
Additional care and maintenance
■
Do not allow chemicals, such as suntan lotion, to come into contact with the
painted surface of the printer dock.
■
If the printer dock has been subjected to inclement weather or you suspect water
has gotten inside the printer dock, turn off the printer dock and remove the paper
tray and color cartridge. Allow all components to air-dry for at least 24 hours
before using the printer dock again. If this does not resolve the problem, contact
customer support (see
■
Connect a tripod directly to the camera; do not connect a tripod to the camera
dock or printer dock.
■
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.