Kodak Series 3 User Manual
Page 16
9
www.kodak.com/go/support
Setting up your digital camera
■
The Battery charging lights turn on as charging
progresses. Charging is complete when all three
lights are lit.
■
You may leave the camera on the printer dock to
maintain the charge.
For Kodak EasyShare camera and dock
compatibility, visit
.
For battery information for other brands of
ImageLink system compatible cameras, see the
camera user’s guide.
Refreshing the Kodak Ni-MH rechargeable digital camera
battery
IMPORTANT: The battery refresh feature is intended for use with the Kodak Ni-MH
rechargeable digital camera battery only. Li-Ion batteries do not require
refreshing.
If you are getting fewer than 20 pictures per charge
with your Kodak Ni-MH rechargeable digital camera
battery, follow the tips under
. If these tips don’t help, the battery may
need to be refreshed. The refresh cycle completely
discharges the battery, then fully recharges it.
NOTE: A full refresh cycle takes up to 8 hours, depending on how much charge is left in the battery. For
best results, refresh the battery overnight; do not interrupt the discharge/recharge cycle.
1 Make sure the Ni-MH rechargeable battery is in the camera.
2 Place your EasyShare camera on the printer dock (see
).