Kodak Series 3 User Manual
Page 45
Using the wireless features of your printer dock
www.kodak.com/go/support
38
Example of an Ad-Hoc network:
Adding your printer dock to a Wi-Fi wireless network
1 Open the accessory door on the printer dock.
IMPORTANT: Insert card only as shown. Do not force the card into the card slot.
2 Orient the Kodak Wi-Fi
®
card as shown, then push
the card into the card slot to seat the connector.
The card slot light blinks as the printer dock scans for
available networks. Once connected, the card slot light
glows steady.
NOTE: When properly inserted, the card sticks out slightly, serving as
an antenna for receiving Wi-Fi signals.
■
To remove the card, push it in, then release it.
When the card is partially ejected, pull it out.
3 Make sure the printer driver from the included Kodak EasyShare software CD is
installed on your computer (see
), then connect the printer dock to your
computer with the USB cable (see
).
Notched corner