Status lights, Under – Kodak Series 3 User Manual
Page 65
Troubleshooting
www.kodak.com/go/support
58
Status lights
Color Cartridge light
Light status
Cause
Action/solution
IMPORTANT:
The color cartridge may lock in place if there is a paper error. Do not attempt to
remove the cartridge without first clearing the paper error. Make sure the Paper
light is off before attempting to remove the cartridge (see Paper light).
Light is off
The color cartridge is properly installed
and is working normally.
None required.
Light glows
steady amber
The color cartridge has five or fewer
prints remaining.
None required.
Light blinks red There is a color cartridge jam.
Clear the jam (
), then
press .
Light glows
steady red
The color cartridge is depleted.
Install a new color cartridge
(
), then press .
The color cartridge is not installed or is
not fully seated.
Remove and re-install the color
cartridge (
), then press .