Printing from the internal card reader – Kodak Series 3 User Manual
Page 20
13
www.kodak.com/go/support
Printing without a computer
Printing from the internal card reader
Use the built-in card slot to print pictures directly from your SDIO, SD, or MMC
memory card.
1 Open the accessory door on the printer dock.
IMPORTANT: Insert the card only as shown. Do not force the card into the card slot. Do
not insert or remove a card when the printer dock is transferring pictures
(see
) or if the card slot light is blinking.
2 Orient the SDIO, SD, or MMC card as shown, then
push the card into the card slot to seat the
connector.
■
To print the current picture, press the Print
button, .
NOTE: If the memory card contains pictures tagged for printing,
instead of printing the current picture, all tagged pictures are
printed (see
).
IMPORTANT: To avoid paper misfeeds or jams, wait until
printing is complete before removing
paper, the paper tray, the color cartridge, or
the camera.
■
To exit without printing, press the Cancel
button, .
■
To remove the card, push it in, then release it. When the card is partially ejected,
pull it out.
Purchase an SD or MMC card and other accessories at a retailer of Kodak products, or
visit
Notched corner