Kodak Series 3 - Manual (Page 31)

Using your printer dock with a computer
www.kodak.com/go/support 24
Connecting to a computer
IMPORTANT: Make sure your camera is NOT docked when you connect the printer dock
to the computer.
1 Make sure Kodak EasyShare software is installed on
the computer (see page 22 ).
2 Plug the labeled end of the included USB cable
into the labeled USB port on your computer.
See your computer documentation for details.
3 Plug the other end of the USB cable into the USB
connector on the back of the printer dock.
On Windows operating systems, the first time the
printer dock is connected, the new hardware wizard
runs. If prompted, follow the instructions on the
screen.
See your computer documentation for details.
NOTE: If a Kodak Wi-Fi
®
card (sold separately) is inserted the first
time the printer dock is connected, the Add Wireless Printer
Assistant may appear. Follow the instructions on the screen.