beautypg.com

Kodak Series 3 User Manual

Page 68

background image

61

www.kodak.com/go/support

Troubleshooting

USB device connector light

Light status

Cause

Action/solution

Light blinks green

Slow blink: the device is
initializing or communicating
with the printer dock.

None required.

Fast blink: there is a device or
communication error.

Check the USB connections from the
device to the printer dock (

page 15

).

Disconnect then reconnect USB cable
from printer dock to device.

Light is off

There is no device connected to
the USB device connector on the
printer dock.

None required.

The connection between the
printer dock and device is loose.

Check the USB connections from the
device to the printer dock (

page 15

).

A device other than a compatible
Kodak card reader or PictBridge
compatible camera or device is
connected.

Disconnect the device. Connect a Kodak
8-in-1 card reader, or a PictBridge
compatible camera or device.

Card slot light (SDIO/SD/MMC card behavior)

Light status

Cause

Action/solution

Light blinks green

Slow blink: the internal card
reader is initializing or
communicating with the
printer dock.

None required.

Fast blink: there is a card or
communication error.

Remove the card and make sure the
card is not write protected or damaged.
Replace with a new card if necessary.
Reinsert the card.

Light is off

An SDIO/SD/MMC card is not
inserted or is improperly
inserted in the card slot.

None required.

This manual is related to the following products: