Sanyo Katana LX - Manual (Page 93)

5. Select Repeat field to set a repeat status for the alarm
and press .
Ⅲ Highlight Once , Daily , Mon – Fri , or Sat and Sun and
press .
6. Select Alarm field to turn the alarm on or off and
press .
Ⅲ Select On or Off and press .
7. Press Save (left softkey) to save the alarm settings.
To stop the alarm:
ᮣ Press any key. (The alarm will stop and then sound
again after the selected snooze interval.)
ᮣ Press Dismiss (right softkey) to dismiss the event.
Using the Stopwatch
To start the stopwatch:
ᮣ Press > Tools > Stopwatch .
Ⅲ Press Start (left softkey) to start the stopwatch.
Ⅲ Press Stop (left softkey) to stop the stopwatch.
Ⅲ Press Resume (left softkey) to restart the stopwatch.
To record a lap time while the stopwatch is running:
Ⅲ Press Lap (right softkey) to record the first lap time.
Ⅲ Press Lap (right softkey) again to record the next lap.
(Up to five lap times can be displayed. If you continue
recording, lap times will be deleted starting with the
oldest.)
To display the stopwatch options:
1. From the stopwatch display, press Options (right
softkey).
2. Select an option and press .
Ⅲ Go to Lap List to display a saved Lap List. Select
Detail (left softkey) to display the Lap List detail.
Ⅲ Save to LapList to save the recorded lap times (not
available when no lap time is saved).
Ⅲ Reset to reset the time to zero and clear any
recorded lap times.
Tip Press the left softkey (On or Off) to toggle the alarm
on and off.
To change the alarm settings, press Settings (right
softkey) to set the ringer length and snooze options.
Section 2G. Calendar and Tools 81
C
a
le
n
d
a
r
a
n
d
T
o
o
ls