Sanyo Katana LX - Manual (Page 80)

2. Select an available speed dial location and
press .
3. Select an entry from the list and press . The
entry’s default phone number is assigned.
Ⅲ To select another phone number in the entry, press
the navigation key right or left.
Editing a Contacts Entry’s Information
To edit a personal Contacts entry’s information:
1. Display the Contacts list and highlight the entry you
wish to edit.
2. Press Options (right softkey) > Edit Contact .
3. Select the field you wish to edit, and then add or edit
the information and press
.
To edit a Group entry:
You can change the group name, the assigned image,
or add new members to the group.
1. Display the Contacts list and highlight the group you
want to edit.
2. Press Options (right softkey) > Edit Group .
3. Change the group name or the image.
Ⅲ See “Adding Group Members to the Group Entry”
to add a member.
4. Press Save (left softkey) to save your changes.
Selecting a RingerType for a Personal
Contact Entry
Assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “RingerTypes”
on page 32.)
1. From the Contacts list, select a Contacts entry to
which you would like to assign a ringer and
press .
2. Select the current ringer type and press to
display the Ringer menu.
3. Select Change .
Note If you attempt to assign an already in-use speed dial
location to a new phone number, a message will
appear asking if you wish to replace the existing
speed dial assignment. Select Replace to assign
the location to the new phone number and delete
the previous speed dial assignment.
68 Section 2F. Contacts