Sanyo Katana LX - Manual (Page 47)

Adjusting the Alert Volume
You can set the alert volume separately from the ringer
volume setting.
1. Press > Settings > Sounds > Volume >
Advanced... .
2. Select Alarms , Text Message , Picture Mail , Voicemail , or
VoiceSMS .
3. Using the navigation key, select Separate Vol.
4. Press the navigation key right or left to choose a
volume level and press
Done (left softkey).
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, a call has been connected,
there are messages, or your network signal is fading as
well as once a minute during a voice call.
1. Press > Settings > Sounds > Alerts .
2. Select Beep Each Minute , Out of Service , Connect ,
Signal Fade/Call Drop , or Messaging .
Ⅲ If you select Messaging , select Text Message ,
Picture Mail , Voicemail , or VoiceSMS .
3. Use your navigation key to select a setting and
press .
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
ᮣ With the phone open, press the volume key down
repeatedly in standby mode. (The screen will display
“Silence All.”)
To deactivate Silence All:
ᮣ With the phone open, press the volume key up
repeatedly to select a volume level.
Tip You can make the ringer vibrate at any volume level
by checking Always Vibrate.
Section 2B. Settings 35
S
e
tt
in
g
s